Concrete pumping

 

During the season 2009 our company bought a Stationary pump SCHWING SP 500.
This machine help us to build skateparks more quickly and effectively. 

SCHWING Stetter  

 

 

We can just transport concrete from the truck to the place we need, or spray
concrete mostly on the walls of our skateboarding pools and banks - shotcrete.

 

If You are interested to hire this machine with two operators in time we don´t use it, check
the technical parameters and videos attatched below and don´t hesitate to contact us.

   

 

 

 

 U.S.Metric
Concrete Output Per Hour (cubic yards-cubic meters)4535
Maximum Pressure on Concrete (psi-bar) 110076
Maximum Aggregate Size (in.-mm) 1.538
Maximum Horizontal Pumping Distance* (feet-meters)1160354
Maximum Vertical Pumping Distance* (feet-meters) 330100
Concrete Cylinder Diameter (in.-mm)6 150
Concrete Cylinder Stroke Length (in.-mm)391000
Differential Cylinder Diameter (in.-mm)3.14/1.9780/50
Maximum Pump Strokes Per Minute32.532.5
Main Hydraulic PumpA11V095
Volume Control0 to Maximum
Concrete Valve Type Long Rock™
Shifting Cylinders2
Hydraulic Tank Capacity (gallons-liters) 50190
Hydraulic System Open Loop
Hopper-Height (in.-mm)481220
Hopper Capacity (cubic feet-cubic meters)11.31
Outlet Diameter (in.-mm)5125
Engine Model - Diesel Tier II Deutz BF4L2011
Engine Model - Diesel Tier III Deutz TCD2011 L04i
Engine Power - (horsepower-kilowatt)7254
Fuel Tank Capacity (gallons-liters)2075
AxleSingle Standard
Axle Capacity Rating (pounds-kilograms)60002722
TiresST 235/80 R16
BrakesElectric
Outrigger Legs Manual Standard
Length (in.-mm)1664216
Width (in.-mm)661676
Height (in.-mm)761930
Trailer Units Weight (pounds-kilograms) 55002495
Remote Control Cable (feet-meters)10030

 

*Pumping distances shown are to be used as a guide only since they have been considerably exceeded on specific projects. Maximum attainable distances depend upon concrete mix design and pipeline diameter. Maximum output and distance cannot be achieved simultaneously.

 

**Pump specifications are for standard units. Other units are available. Specifications are subject to change without prior notice.

 Contacts 

Filip Holý            +420 776 682 440

Denis Martaus     +420 608 430 689

Hydro Gas Manufacture, s.r.o., Poděbradova 35, Moravska Ostrava 702 00, Czech Republic